Home  |  About Us | Technical Profile  |  Organization Chart  |  List of Clients  |
Product Range  |  Achievements  |  Feedback  |

   

  
Technical Profile

 
Annexure - III

INSTALLED FACILITIES AT DCMS ENGINEERING CO. & ASSOCIATE CO. - JYOTI ENGINEERING,
J. P. ENGINEERING COMPANY, RADHESHYAM DISHED ENDS WORKS, OM SAI ENGINEERING

1.  Design and Drafting Facility. 7.  Chipping & Gauging Facility.
2.  Cutting Facility. 8.  N.D.T. Testing Facility.
3.  Handling Facility. 9.  Air Compressor Facility.
4.  Rolling and Bending Facility. 10.  Hydro Testing Facility
5.  Drilling Facility. 11.  Spraying Facility..
6.  Welding Facility. 12.  Mechanical Tube Expander Facility.
  13.  Machine shop Facility

TOTAL WORKING AREA OF DCMS ENGINEERING COMPANY. &
OTHER ASSOCIATE CONCERN IS 15000 Sq. Ft. COVERED AND OPEN AREA 8000 Sq. Ft.

LIST OF MACHINERIES IN DCMS ENGINEERING CO. & ASSOCIATE CONCERN JYOTI ENGINEERING,
J. P. ENGINEERING COMPANY, RADHESHYAM DISHED ENDS WORKS, OM SAI ENGINEERING.

HANDLING FACILITIES :

Gantry Chain Pulley Block

20 Tons

2 Nos.

Gantry Chain Pulley Block

10 Tons

2 Nos.

Gantry Chain Pulley Block

3 Tons

2 Nos.

Gantry Chain Pulley Block

1 Tons

6 Nos.

CUTTING FACILITIES :

Gas cutting Torch Set (Ind. Oxy.) 4 Nos.
Plasma Cutting Torch Set (Ind. Oxy.) CAP  2" 3 Nos.
................................................................................
 
BENDING FACILITIES :
 Plate Bending Machine  - 8' long x THK 1"  3 No.
 Dish Bending Machine  - 6' Dia    1 No.
 Hydraulic Pipe Bending Machine
  6" cap
 (Denmark)  1 No.
 Hydraulic Pipe Bending Machine
 6" cap.
 (Indian)  1 No.
................................................................................

ROLLING FACILITIES :

Hand Rolling Machine 6' long x THK1/4" 1 No.
Power Rolling Machine 8' long x THK1"1 No.
Power Rolling Machine 8' long x THK16 MM1 No.

................................................................................
 
MECHANICAL TUBE EXPANDER FACILITY :

 Power Master Tube expanding sets 2 Nos.

 

................................................................................
 
WELDING FACILITIES :

 AC/DC Rectifiers with Tig Sets with High
 Frequency units & separator  (Make Indian
 Oxygen & Advani Orlicon Ltd.)
 16 Nos.
................................................................................
 



MACHINE SHOP FACILITIES : LATHE MACHINE
Heavy Duty Lathe Machine6' Swing Cap.1 No.
Heavy Duty Lathe Machine12' Bed Length5 No.
Kirloskar Lathe Machine8' Bed Length9 Nos.
Kirloskar (Sigma) Machine6' Bed Length5 Nos.

................................................................................
 
SHAPING MACHINE :

24" Stroke Shaping Machine4 Nos.

................................................................................
 MILLING MACHINE :

 Vertical Milling Machine (German) 1 No.
................................................................................
DRILLING MACHINE :
1. Radial Drilling Machine2" Capacity3 No.
2. Pillar Type Drilling M/c.2" Capacity

3 No.

3. Pillar Type Drilling M/c.1" Capacity1 No.
4. Bench Drilling Machine3/4" Capacity4 No.
5. Hand Drill Machine3/4" Capacity3 Nos.
................................................................................

 PLANNER MACHINE :
 Heavy duty Planner Machine 10' Capacity 1 No.
................................................................................
 COMPRESSED AIR FACILITIES :
 Pneumatic Air Compressors for building
 the Pressure & Testing of Pumps & Pump's
 Characteristics
 2 Nos.

................................................................................
GRINDING FACILITIES :

 Portable Grinders (Wolf Make)
 Flexible Shaft (Sunhner India)
20 Nos.

................................................................................
BUFFING MACHINE

Buffing Machine for S.S. Polishing8 Nos.

...............................................................................
LAPPING MACHINE :

Lapping Machine (Hifin Products Pvt.Ltd.)1 No.

...............................................................................
SPRAYING FACILITY :

 Pneumatically operated spraying
 machine along with accessories
1 No.
...............................................................................
HYDRAULIC TESTING PUMPS :
Hyd. Testing Pumps for Pressure Testing5 Nos,

...............................................................................
DESIGN AND DRAFTING FACILITY

No. of drafting tables3 Nos.
No. of qualified Draftsman3 Nos.
Ammonia printing machine1 No.

In addition to above, our sub contractors M/s. Ecelectic Consultants and Engineers (P) Ltd., have full fledge computerised drafting facility and team of highly experienced design engineers to undertake design of pressure vessel, Heat Exchangers, Piping Systems, Ducting etc. and are capable of executing complete plants on turnery basis.

   D.P./ N.D.T. FACILITIES :
Dye Penetrations Testing Kits4 Nos.
X-Ray/Gamma Ray
Ultrasonic, M.P. Test
Micro/Macro test.
Facilities available with our sub contractor like
Metallurgical Services, Radiography Services,
X-Ray Eng. Co. X-Ray illuminator available in house.
Tensile, Bending
Impact, Hardness.
 
.. do ..
T.C.R. Engineering Co.
 
   

 
Back  |  Next
 
Home  |  About Us | Technical Profile  |  Organization Chart  |  List of Clients  |
Product Range  |  Achievements  |  Feedback  |
 
Designed & Hosted by : MID   Promoted by : GID